IsoPAQ-632

IsoPAQ-632

Signal Splitter/Repeater with double outputs for mA and V signals

The Signal Splitter/Repeater IspPAQ-632 is used for isolation, conversion and distribution of 0/4 … 20 mA, 0/1 … 5 V and 0/2 … 10 V standard signals. The measuring input can also supply the loop power for 2-wire transmitters.

The input and two isolated outputs can be easily configured by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

• Calibrated signal setting via DIP switch
  Input and outputs can be set by using DIP switch – high precision without any further adjustment
• 4-Port isolation
  Protection against erroneous measurements due to parasitic voltages or ground loops
• Extremely slim design
  6.2 mm slim housing for a simple and space saving DIN rail mounting
• Optional In-Rail-Bus mounting rail connector
  Allows for fast and economical installation
• Protective Separation acc. to EN 61140
  Protects service personnel and downstream devices against impermissibly high voltage
• Maximum reliability
  No maintenance costs

歡迎下載 產品規格

更多的產品資訊，歡迎聯絡我們Contact Form