IsoPAQ-661

IsoPAQ-661

Isolation transmitter for Bipolar and Unipolar mA/V signals with calibrated range selection

The Bipolar Isolation Amplifier IisPAQ-661 is used for isolation and conversion of bipolar and unipolar industrial standard signals.

The input and output range of IsoPAQ-661 can be easily set by using DIP switch. Due to the calibrated range selection no further adjustment is necessary.

A switchable compensation of the measuring range can be performed at the Zero/Span potentiometers on the front panel. Also the cut-off frequency can be adapted to the measurement task by using the DIP Switch.

The auxiliary power can be supplied via the connection terminals or via the optional In-Rail-Bus connector. A green LED on the front of the unit has been provided to monitor the power supply.

• Calibrated signal setting via DIP switch
  Input and output range can be set by using DIP switch – high precision without any further adjustment
• High bandwidth; short response time
  No signal distortion; no falsification of measured signal
• Switchable Zero/Span compensation
  For readjustment of the sensor or field device
• 3-Port isolation
  Protection against erroneous measurements due to parasitic voltages or ground loops
• Extremely slim design
  6.2 mm slim housing for a simple and space saving DIN rail mounting
• Optional In-Rail-Bus mounting rail connector
  Allows for fast and economical installation
• Protective Separation acc. to EN 61140
  Protects service personnel and downstream devices against impermissibly high voltage

歡迎下載 產品規格

更多的產品資訊，歡迎聯絡我們Contact Form